Septic and Sewage Tank Cleaning | An Ultimate Guide

 

We are all concerned with drinking clean water, we want the purest water for cleaning and daily tasks. But have you ever thought about where all this water goes? Is this water removed properly? Ideally, all of your home's wastewater goes into septic tanks dug deep in your backyard. 

Most of us build an excellent sewer system when building the house. And the situation is good and cheerful until years later the bathtub faucet fills the bathtub or the toilets overflow. This is exactly where the problem lies. Out of sight shouldn't mean out of mind, these septic and sewage tanks are several feet below ground level, we can never be sure what is going on inside.


First things first, where does it all go? 

All the wastewater from your home or business goes to the septic tanks through the sewer lines. An anaerobic bacterial system intervenes in these tanks that decompose the waste discharged into the tank. These tanks are made so that the heavier debris settles to the bottom and mixes with the soil to form a layer of sludge. The problem begins when there is no more space and wastewater begins to obstruct the absorption zone of the soil. It can cause various health problems in addition to bad odor and damage to the sewer system. Why wait so long until the problem becomes so obvious? Fixing a septic problem is more of a headache than regular maintenance.

How often should a tank be cleaned?

 Most of you still wonder if it is important to clean the tank. At best, annual tank cleaning is the best way to keep them under control. However, it can take two to three years. But it mainly depends on the following factors: General use. The number of people in the household. Size of the septic tank. All of these factors are critical when scheduling cleaning appointments. You can ping us and provide all the details to our experts so that we can track the level of debris and organize cleaning sessions based on your requirements.

Why is it essential to have expert services for cleaning water tanks?

 The internet is full of many videos showing how to clean your septic and sewage tanks and you can give it a try. However, if you do not do it correctly, you should know that you are putting the health of your entire family at risk and it is about the following problems:

1 The problem: 

Cleaning the sewage tank is not as easy as it seems. The first step in cleaning is to empty the contents that require proper disposal. You can easily trust GlobaleX for these problems. 

2. Difficult Solutions:

 Sometimes the overflow reaches the point where most of the drain line and tanks need repair. And obviously, you need a professional to do that. What's better than trying GlobaleX septic tank and septic tank cleaning tips before it's too late?

 3. Smelly Smell -

 If your septic and sewage tank remains dirty for a long time, it may start to smell bad. Yes, sediment formation, debris settlement, and bacteria formation can mix with groundwater and ultimately make it unsuitable for use. What is the solution? Better to call Dubai septic tank and sewage cleaning services before negligence affects your health. 

4. Waterborne Diseases - 

If you don't clean your water tanks for years, make it clear that you are building a house for harmful viruses and bacteria. It can lead to various diseases and eventually one of your family members or you could fall into the trap. There is a long list of diseases like diarrhea, cholera, and typhoid that you will be vulnerable to. How can you stop it? Just call GlobaleX, one of their teams will come and check the tanks to start the cleaning process. And in a day or two, your tank will be sanitized. It is easy.

How is the tank cleaning done

Step 1: The process begins with the evaluation of the septic tank.

 Step 2: The entire tank is then disinfected.

 Step 3: All the sludge and solid waste are drained by a sludge pump.

 Step 4: Then begins the process of removing all sediment, dirt, stains, and fungus using high precision equipment. 

Step 5: Next comes the high-pressure jet that cleans the walls, ceiling, and floor. Step 6: A vacuum cleaning technique is used to suck up the remaining dirt.

 Step 7: Next, an antibacterial spray or liquid bleach is used to completely sanitize the tank. 

Step 8: The tank and the surrounding area are subjected to ultraviolet radiation to clean any harmful bacteria. 

Step 9: The tank is completely drained and allowed to dry. Step 10: Voila! The tank is clean and ready to use.

Comments

Popular posts from this blog

Air Conditioning Installation Tips

How to Find a Great Real Estate Agent you can trust